Metered NI-STARTER® has a 1.5" barrel with No charger
NI-STARTER® has a 1.5" barrel with No charger
Our 3800ma NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
This size of the Nifty Hinge is for all model aircraft installations, gliders, Sport models, 1/4 scale, and high performance.
Metered 3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.
Metered 3800ma NI-STARTER® with a 2.5" barrel with No charger
The NO-HEAT Solvent activates the adhesive on the back side of film trim and bonds it to the face of the covering material on the model, "without the use of heat".
This remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
This NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
4.8V 2000ma NiMH 4/5 A with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
The Mark "X" is designed to operate under the control of or behind a power panel with a fuel pump control switch.
This unit is set up for a Twin Cylinder Engine.
NI-STARTER® with a 2.5" barrel. Only
Metered 3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better.
NI-STARTER® has a 3.5" barrel. The Battery is a NiMH 3800ma cel
Designed for use with Glo-Fuel, Smoke Fluids, and water.
Now with 5 amps of built in power. Over 1.5 hours of glow power.
The Nifty Plug & Socket Keeper is a great little item that will avoid the accidental disconnection of the servo cable plug and sockets within the model.
The length is the standard 5/8" and come with 12" red Teflon wire.
Charge Adapter Cord for NI-STARTER
A special injection molded nylon hinge designed for use on flaps, spoilers, landing gear doors and many other unique applications. Unit without a control tab
110V American AC charger for the NI-STARTER®
Adapts the 4.8V Pulsed Glow Driver mcd471 and Mcd472 external charge jack to fit your Futaba, JR, HI-TEC, (and others) TX&RX A/C chargers.
With tab for the connection of the servo push rod clevis.
A Spring loaded nylon hinge designed for use on landing gear doors and many other unique applications
4.8V 5000ma NiMH "C" with a female 4pin deans for Mcd473 - Mcd479 Pulsed On Board Glow Driver.
It will both store and protect your glow plugs from tool box damage.
High quality foam tape with an adhesive on one side. It's great for seating wings of aircraft or sealing hatches on model boats etc.
Our FiberGlass Tape is a finely woven glass material especially treated to accept resin into the weave.
Installed temporarily to hold the control surface in place while sanding and shaping is being done.
This unit is set up for a 7 Cylinder Engine
The Nifty Driver is a "captive screw driver" for slotted head screws.
Con-Do-It can make the installation of radio cables, servo cables, air line tubing quick, simple and serviceable.
This unit is set up for 2 - Single Cylinder Engines
High quality steel pins with a smooth chrome plating and the sharpest of points.
Works with one nose wheel and two side folding wing doors.
Best hinge for any installation where you want the lightest weight CA hinge without giving up the high level of flexibility and strength that you require.
A pin less hinge with the flexibility and strength that only a poly hinge can
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location
A special injection molded hinge from carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
A Carbon fiber filled Spring loaded nylon hinge designed for use on landing gear doors etc. where extra strength is needed.
3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.