This Electric Motor mount is adjustable to fit speed 400 to .25 size motors. The mounts are injection molded from a very light weight but very strong glass fiber filled nylon based material.
Designed to hold over 50 different standard and mid-size servos. Molded from tough, glass filled nylon, the Universal Servo Tray is built to last.
Two optional installations available, all the optional parts to do them is included. This Super Clevis is molded from a new material giving extremely smooth operation. 2 per pkg.
This unit is set up for a Twin Cylinder Engine.
This unit is set up for 4 Engines with 1 Cylinder ea.
Aileron connector for non-threaded wire.
A complete cable system supplied with 6 feet of special 49 strand hi-flex plastic coated steel cable, cable keepers, nylon clevis plus threaded couplers.
Steering arm that will stand up to the load and abuse a nose wheel gets without bending or flexing.
Aileron Bearing is designed to be used with 3/32" wire. It has a 7/8" x 1/2" tab with multiple holes for firm mounting.
Designed to fit 1/16" to 5/32" axles and up to 3" diameter wheels.
Strong Box measures 2.4" deep, 2.7" wide, and 4.1" inches long. It weighs only 1.9 ounces complete with foam padding and mounting hardware.
The Strong Box II is a larger version of the StrongBox that has been designed to meet the needs of giant scale flyers. It measures 3.5" deep, 3.3" wide, and 6.2" long. It weighs only 4 ounces complete with foam padding and hardware.
The NO-HEAT Solvent activates the adhesive on the back side of film trim and bonds it to the face of the covering material on the model, "without the use of heat".
Power Head Assembly with Nut & Washer for use with #Mcd442, Mcd443, Mcd444 & Mcd446
Replacement "L" bracket used on Models #Mcd443, Mcd442, Mcd444, & Mcd446
The Nifty Plug & Socket Keeper is a great little item that will avoid the accidental disconnection of the servo cable plug and sockets within the model.
Replacement internal pump for Mark X & Super X fuel pumps 6V & 12V.
Replacement 12V Motor for our Mark X & Super X 12V pumps.
Replacement 6V Motor for our Mark X & Super X 6V pumps.
Replacement Spring Loaded hinges that are available in #Sot132 Kit
Replacement Wavy Spring that are available in Sot132 and Sot135 Kits
Replacement Glow Plug Harness Kit for Mcd474TE
This unit is set up for 3 Engines with 1 Cylinder ea.
Lens Covers (set of 12) are vacuum formed, 30 mil. ABS plastic in 6 different shapes.
Replacement part: Check Valve for Sot1260 and Sot1261 Smoke Pump.
Replacement part: "T" Fitting for Sot1260 and Sot1261 Smoke Pump.
Replacement LED on glow driver for Mcd471 - Mcd479 On Board Systems and Mcd466 & 464 On Board systems.
Replacement plug harness kit for Mcd466 & Mcd464 On Board Systems.
Carbon Fiber filled Replacement Spring Loaded hinges.
It will both store and protect your glow plugs from tool box damage.
It is just great in your field box or on your workbench to prevent the loss of the important small parts.
Con-Do-It can make the installation of radio cables, servo cables, air line tubing quick, simple and serviceable.
Allow the servo speed to be adjusted, 2 to 10+ seconds of travel in either direction with no loss of servo torque.
Adapts the 4.8V Pulsed Glow Driver mcd471 and Mcd472 external charge jack to fit your Futaba, JR, HI-TEC, (and others) TX&RX A/C chargers.
Switch Glow Batteries, Smoke Pumps, Electronic Ignition Packs, Lights, DC Motors, or anythings needing to be switched in flight.
allow the servo speed to be adjusted, 2 to 10+ seconds of travel in either direction with no loss of torque.
The standard 5/8" connector with 18" Black Teflon wire.
The Deephead 1.0" PlugLock (Glow Plug) adapter is for engines with recessed glow plugs.
This unit is set up for a Single Cylinder Engine.
Now with 5 amps of built in power. Over 1.5 hours of glow power.
Weight is approx. 1.5 oz. without battery
pecial larger size silicone fuel line with a molded probe for use in fueling models
Works with one nose wheel and two side folding wing doors.
Replacement hub for 6" Folding Propellers.
Replacement 6" x 4" Blades Only. Package contains 2 Blades.
6" x 4" Folding Propeller. Assembled.
Two each of four types, two double arms, two each of the small, medium, and large single servo arm.
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better.
Great for quick mounting servos, speed controllers and other items within aircraft, boats and cars.
110V American AC charger for the NI-STARTER®
The Nifty Driver is a "captive screw driver" for slotted head screws.
A special injection molded nylon hinge designed for use on flaps, spoilers, landing gear doors and many other unique applications. Unit without a control tab
A pin less hinge with the flexibility and strength that only a poly hinge can
Complete Steering Arm assembly with the New Super Clevis.
Two complete Control Horn Sets
The Mark "X" is designed to operate under the control of or behind a power panel with a fuel pump control switch.
Small (5/64" ID) 2ft package
This unit is set up for 2 - Single Cylinder Engines
This unit is set up for a 3 Cylinder Engine.
This remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
PlugLock® Glow Plug adapters are ideal for modelers wishing to use their power panels to light glow plugs.
High quality foam tape with an adhesive on one side. It's great for seating wings of aircraft or sealing hatches on model boats etc.
High quality foam tape with a strong high quality adhesive on two sides. This tape is great for mounting servos, speed controllers and other items within aircraft, boats and cars
Double control horn assembly has all items needed for two different installations.
Small Control Horns are 3/4" tall and supplied with a pad and 2-56 screws for mounting.
Small Bell Crank arms are 7/8" in length and supplied with the bearing, mounting screw, washer and nut.
They are supplied eight per package with mounting screws.
All are supplied with mounting screws.
High quality steel pins with a smooth chrome plating and the sharpest of points.
Functions as an on/off "in line" battery toggle switch for #Mcd471 & #Mcd472 On-Board Glow Driver units.
Lightweight injection molded wheels
Replacement plug harness kit for Mcd471On Board Systems
Male Molex pin used on all plug harness kits on all On Board Systems
Deans 3pin female connector with 12" Red & Black 20ga PVC Wire attached
A self contained unit 3 1/2" long by 1 1/4" and 1 1/4" high weighing only 3 ozs.
Our FiberGlass Tape is a finely woven glass material especially treated to accept resin into the weave.
Our 3800ma NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
This size of the Nifty Hinge is for all model aircraft installations, gliders, Sport models, 1/4 scale, and high performance.
This NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
The length is the standard 5/8" and come with 12" red Teflon wire.
Silicone Fuel Line, Small (5/64" ID) 30ft Roll
A special injection molded hinge from carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
Metered NI-STARTER® has a 1.5" barrel with No charger
NI-STARTER® has a 1.5" barrel with No charger
Replacement hub for Folding Propellers from 7" - 12"
Replacement 7" x 4" Blades Only. Package contains 2 Blades.
7" x 4" Folding Propeller. Assembled
One "X" arm, double arm, and one each of small and medium single arm.