Charge Adapter Cord for NI-STARTER
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better.
Great for quick mounting servos, speed controllers and other items within aircraft, boats and cars.
Best hinge for any installation where you want the lightest weight CA hinge without giving up the high level of flexibility and strength that you require.
Nifty Driver is a "captive screw driver" for hex headed screws.
With tab for the connection of the servo push rod clevis.
a pin less hinge with the flexibility and strength that only a poly hinge can offer.
Complete Steering Arm assembly with the Super Clevis
Two complete Control Horn Sets
Designed for use with Glo-Fuel, Smoke Fluids, and water.
Silicone Fuel Line 3/32 id 2ft
This unit is set up for 2 Engines with 2 Cylinder ea.
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location
PlugLock® Glow Plug adapters are ideal for modelers wishing to use their power panels to light glow plugs.
High quality foam tape with an adhesive on one side.
High quality foam tape with a strong high quality adhesive on two sides.
Double control horn assembly has all items needed for two different installations.
Large Control Horns are 1 1/8" tall and supplied with a pad and 2-56 screws for mounting.
Large Bell Crank arms are 1" in length and supplied with the bearing, mounting screw, washer and nut.
Supplied eight per package with mounting screws
Supplied with mounting screws
High quality steel pins with a smooth chrome plating and the sharpest of points.
Lightweight injection molded wheels
Replacement Glow Plug Harness Kit for Mcd472 Twin Cylinder On Board Glow Driver
Female Molex pin used on all plug harness kits on all On Board Systems
Deans 4pin female connector with 12" Red & Black 20ga PVC Wire attached
Works with three Nose door type aircrafts (ie: P38)
self contained unit 3 1/2" long by 1 1/4" wide and 1 1/4" high weighing only 3 ozs
4.8V 2000ma NiMH 4/5 A with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
This unit is set up for a 4 Cylinder Engine.
functions as an on/off "in line" battery toggle switch for #Mcd473 - #Mcd479 On-Board Glow Driver units
Our FiberGlass Tape is a finely woven glass material especially treated to accept resin into the weave.
Metered 3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.
3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.
PlugLock (Glow Plug) adapter length is for deeply recessed glow plugs and comes with 12" red Teflon Wire
Silicone Fuel Line, Small (5/64" ID) 30ft Roll
A special injection molded hinge from Carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
Metered 3800ma NI-STARTER® with a 2.5" barrel with No charger
NI-STARTER® with a 2.5" barrel. Only
Replacement 8" x 4" Blades Only.
8" x 4" Folding Propeller. Assembled
2V Field Trickle Charger is small, light weight, and attaches to any convenient place on your field box to top off your Ni-Starter
Installed temporarily to hold the control surface in place while sanding and shaping is being done.
A special hinge for the scale model control surface
Horn assembly is available alone or with 6 feet of pull-pull cable and 4-40 hardware.
Super "X" Silicone, Small (5/64" ID) 2ft pkg
This unit is set up for a 5 Cylinder Engine
High quality foam tape with an adhesive on one side. It's great for seating wings of aircraft or sealing hatches on model boats etc.
Supplied eight per package with mounting screws.
supplied with mounting screws.
Nifty Wing Mounting Kit allows quick and easy mounting of the wing
Functions as an on/off "in line" battery switch for #473 thru #480 On-Board Glow Driver units
2Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car
110V American AC charger for the Super Mcd466
This unit is set up for 2 Engines with 3 Cylinder ea.
Deans 3pin male connector with 12" Red & Black 20ga PVC Wire attached
4.8V 3000ma NiMH Sud C with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
A Spring loaded nylon hinge designed for use on landing gear doors and many other unique applications
Replacement Hub for 13" Folding Propellers
Metered 3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
Super "X" Silicone, Small (5/64" ID) 25ft Rol
2pin Male Molex connector used on plug harness kits for On Board Systems
A Carbon fiber filled Spring loaded nylon hinge designed for use on landing gear doors etc. where extra strength is needed.
NI-STARTER® has a 3.5" barrel. The Battery is a NiMH 3800ma cel
NI-STARTER® has a 3.5" barrel
Replacement 10" x 6" Blades Only
10" x 6" Folding Propeller. Assembled.
Heavy Duty Hinge designed for the location where you want more performance than a standard model hinge offers
Super "X" Silicone, Large (3/32" ID) 2ft pkg
This unit is set up for a 6 Cylinder Engine
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
18" extension cord that will convert a NI-STARTER or other locking type units into a remote corded unit.
Replacement Glow Plug Harness Kit for Mcd473 Three Cylinder On Board Glow Driver
3Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car.
This unit is set up for 2 Engines with 4 Cylinders ea
Deans 4pin male connector with 12" Red & Black 20ga PVC Wire attached.
4.8V 3000ma NiMH Sub "C" with a female 4pin deans for Mcd473 - Mcd473 Pulsed On Board Glow Driver.
Remote corded 3800ma NI-STARTER® has a 15" cord. Excellent for soft mount engines with a lot of vibration
Remote corded 3800ma NI-STARTER® has a 15" cord
Super "X" Silicone, Large (3/32" ID) 25ft Roll
3pin Male Molex connector used on plug harness kit for On Board System
Remote corded 3800ma Metered NI-STARTER® has a 15" cord.