The Mark "X" is designed to operate under the control of or behind a power panel with a fuel pump control switch.
This unit is set up for a Twin Cylinder Engine.
This unit is set up for a Single Cylinder Engine.
Replacement Glow Plug Harness Kit for Mcd474TE
Works with one nose wheel and two side folding wing doors.
Replacement plug harness kit for Mcd471On Board Systems
This unit is set up for a 7 Cylinder Engine
Replacement Glow Plug Harness Kit for Mcd479 Nine Cylinder On Board Glow Driver.
Now with 5 amps of built in power. Over 1.5 hours of glow power.
This size of the Nifty Hinge is for all model aircraft installations, gliders, Sport models, 1/4 scale, and high performance.
Replacement Glow Plug Harness Kit for Mcd475 Five Cylinder On Board Glow Driver
Designed for use with Glo-Fuel, Smoke Fluids, and water.
Metered NI-STARTER® has a 1.5" barrel with No charger
Replacement Glow Plug Harness Kit for Mcd476 Six Cylinder On Board Glow Driver. Kit i
Replacement Glow Plug Harness Kit for Mcd473 Three Cylinder On Board Glow Driver
Replacement Glow Plug Harness Kit for Mcd472 Twin Cylinder On Board Glow Driver
Replacement Glow Plug Harness Kit for Mcd477 Seven Cylinder On Board Glow Driver.
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better.
Two optional installations available, all the optional parts to do them is included. This Super Clevis is molded from a new material giving extremely smooth operation. 2 per pkg.
Our 3800ma NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
Replacement Glow Plug Harness Kit for Mcd474QE
Adapts the 4.8V Pulsed Glow Driver mcd471 and Mcd472 external charge jack to fit your Futaba, JR, HI-TEC, (and others) TX&RX A/C chargers.
This unit is set up for a 3 Cylinder Engine.
Works with three Nose door type aircrafts (ie: P38)
NI-STARTER® has a 1.5" barrel with No charger
This unit is set up for a 5 Cylinder Engine
Replacement Glow Plug Harness Kit for Mcd474 Four Cylinder On Board Glow Driver
Replacement Glow Plug Harness Kit for Mcd472SE On Board Glow Driver
Complete Steering Arm assembly with the New Super Clevis.
This unit is set up for 2 - Single Cylinder Engines
Metered 3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.
Weight is approx. 1.5 oz. without battery
Complete Steering Arm assembly with the Super Clevis
Two complete Control Horn Sets
This unit is set up for 3 Engines with 1 Cylinder ea.
A special injection molded nylon hinge designed for use on flaps, spoilers, landing gear doors and many other unique applications. Unit without a control tab
This NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
4.8V 2000ma NiMH 4/5 A with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
Functions as an on/off "in line" battery toggle switch for #Mcd471 & #Mcd472 On-Board Glow Driver units.
Con-Do-It can make the installation of radio cables, servo cables, air line tubing quick, simple and serviceable.
110V American AC charger for the NI-STARTER®
This unit is set up for 4 Engines with 1 Cylinder ea.
A pin less hinge with the flexibility and strength that only a poly hinge can
4.8V 5000ma NiMH "C" with a female 4pin deans for Mcd473 - Mcd479 Pulsed On Board Glow Driver.
Horn assembly is available alone or with 6 feet of pull-pull cable and 4-40 hardware.
4.8V 4000ma NiMH Sub "C" with a female 4pin deans for Mcd473 - Mcd475 Pulsed On Board Glow Driver.
4.8V 3000ma NiMH Sud C with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
NI-STARTER® with a 2.5" barrel. Only
110V American AC charger for the Super Mcd466
4.8V 3000ma NiMH Sub "C" with a female 4pin deans for Mcd473 - Mcd473 Pulsed On Board Glow Driver.
With tab for the connection of the servo push rod clevis.
Remote corded 3800ma NI-STARTER® has a 15" cord. Excellent for soft mount engines with a lot of vibration
Functions as an on/off "in line" battery switch for #473 thru #480 On-Board Glow Driver units
3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.
Metered 3800ma NI-STARTER® with a 2.5" barrel with No charger
This unit is set up for 2 Engines with 2 Cylinder ea.
The Nifty Driver is a "captive screw driver" for slotted head screws.
functions as an on/off "in line" battery toggle switch for #Mcd473 - #Mcd479 On-Board Glow Driver units
Charge Adapter Cord for NI-STARTER
2V Field Trickle Charger is small, light weight, and attaches to any convenient place on your field box to top off your Ni-Starter
Deans 3pin female connector with 12" Red & Black 20ga PVC Wire attached
Installed temporarily to hold the control surface in place while sanding and shaping is being done.
Best hinge for any installation where you want the lightest weight CA hinge without giving up the high level of flexibility and strength that you require.
This unit is set up for a 4 Cylinder Engine.
It is just great in your field box or on your workbench to prevent the loss of the important small parts.
The NO-HEAT Solvent activates the adhesive on the back side of film trim and bonds it to the face of the covering material on the model, "without the use of heat".
This remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
a pin less hinge with the flexibility and strength that only a poly hinge can offer.
This Electric Motor mount is adjustable to fit speed 400 to .25 size motors. The mounts are injection molded from a very light weight but very strong glass fiber filled nylon based material.
Super "X" Silicone, Large (3/32" ID) 2ft pkg
This unit is set up for 2 Engines with 3 Cylinder ea.
A special injection molded hinge from carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
Designed to hold over 50 different standard and mid-size servos. Molded from tough, glass filled nylon, the Universal Servo Tray is built to last.
NI-STARTER® has a 3.5" barrel
This unit is set up for a 9 Cylinder Engine.
Remote corded 3800ma NI-STARTER® has a 15" cord.
A Spring loaded nylon hinge designed for use on landing gear doors and many other unique applications
This unit is set up for 2 Engines with 4 Cylinders ea
A special injection molded hinge from Carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
Nifty Driver is a "captive screw driver" for hex headed screws.
Small (5/64" ID) 2ft package
A special hinge for the scale model control surface
pecial larger size silicone fuel line with a molded probe for use in fueling models
Heavy Duty Hinge designed for the location where you want more performance than a standard model hinge offers
Lightweight injection molded wheels