Metered NI-STARTER® has a 1.5" barrel with No charger
NI-STARTER® has a 1.5" barrel with No charger
Our 3800ma NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
Metered 3800ma NI-STARTER® has a 2.5" barrel and is supplied with an UL Approved 110V AC Charger.
This size of the Nifty Hinge is for all model aircraft installations, gliders, Sport models, 1/4 scale, and high performance.
Metered 3800ma NI-STARTER® with a 2.5" barrel with No charger
The NO-HEAT Solvent activates the adhesive on the back side of film trim and bonds it to the face of the covering material on the model, "without the use of heat".
This remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
This NI-STARTER® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger.
4.8V 2000ma NiMH 4/5 A with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
The Mark "X" is designed to operate under the control of or behind a power panel with a fuel pump control switch.
This unit is set up for a Twin Cylinder Engine.
NI-STARTER® with a 2.5" barrel. Only
Metered 3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better.
NI-STARTER® has a 3.5" barrel. The Battery is a NiMH 3800ma cel
The length is the standard 5/8" and come with 12" red Teflon wire.
Designed for use with Glo-Fuel, Smoke Fluids, and water.
Now with 5 amps of built in power. Over 1.5 hours of glow power.
The Nifty Plug & Socket Keeper is a great little item that will avoid the accidental disconnection of the servo cable plug and sockets within the model.
Charge Adapter Cord for NI-STARTER
A special injection molded nylon hinge designed for use on flaps, spoilers, landing gear doors and many other unique applications. Unit without a control tab
110V American AC charger for the NI-STARTER®