Remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
PlugLock® Glow Plug adapters are ideal for modelers wishing to use their power panels to light glow plugs.
Supplied eight per package with mounting screws
Nifty Wing Mounting Kit allows quick and easy mounting of the wing
Deans 3pin female connector with 12" Red & Black 20ga PVC Wire attached
Lens Covers (set of 12) are vacuum formed, 30 mil. ABS plastic in 6 different shapes.
Deans female charge Jack with plate and swrews for mounting
This unit is set up for a 4 Cylinder Engine.
A special hinge for the scale model control surface
This unit is set up for a 3 Cylinder Engine.
18" extension cord that will convert a NI-STARTER or other locking type units into a remote corded unit.
Steering arm that will stand up to the load and abuse a nose wheel gets without bending or flexing.
Aileron Bearing is designed to be used with 3/32" wire. It has a 7/8" x 1/2" tab with multiple holes for firm mounting.
A special injection molded hinge from Carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
functions as an on/off "in line" battery toggle switch for #Mcd473 - #Mcd479 On-Board Glow Driver units
Weight is approx. 1.5 oz. without battery
Remote corded 3800ma NI-STARTER® has a 15" cord.
PlugLock (Glow Plug) adapter length is for deeply recessed glow plugs and comes with 12" red Teflon Wire
Replacement 7" x 4" Blades Only. Package contains 2 Blades.
Horn assembly is available alone or with 6 feet of pull-pull cable and 4-40 hardware.
Super "X" Silicone, Small (5/64" ID) 25ft Rol
This unit is set up for a 8 Cylinder Engine.
Tips fit both the power and extension cords
Double control horn assembly has all items needed for two different installations.
Small Control Horns are 3/4" tall and supplied with a pad and 2-56 screws for mounting.
Replacement plug harness kit for Mcd471On Board Systems
Replacement Spring Loaded hinges that are available in #Sot132 Kit
Replacement plug harness kit for Mcd466 & Mcd464 On Board Systems.
Remote corded 3800ma NI-STARTER® has a 15" cord. Excellent for soft mount engines with a lot of vibration
3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
Replacement 6" x 4" Blades Only. Package contains 2 Blades.
7" x 4" Folding Propeller. Assembled
One "X" arm, double arm, and one each of small and medium single arm.
Complete Steering Arm assembly with the Super Clevis
The Mark "X" is designed to operate under the control of or behind a power panel with a fuel pump control switch.
Super "X" Silicone, Small (5/64" ID) 2ft pkg
This unit is set up for a 9 Cylinder Engine.
Tips fit both the power and extension cords.
A complete cable system supplied with 6 feet of special 49 strand hi-flex plastic coated steel cable, cable keepers, nylon clevis plus threaded couplers.
Strong Box measures 2.4" deep, 2.7" wide, and 4.1" inches long. It weighs only 1.9 ounces complete with foam padding and mounting hardware.
2pin Male Molex connector used on plug harness kits for On Board Systems
Replacement power cord - 36" long
18" extension cord that will convert a NI-STARTER or other locking type units into a remote corded unit
Replacement hub for Folding Propellers from 7" - 12"
Replacement 10" x 6" Blades Only
6" x 4" Folding Propeller. Assembled.
Two each of four types, two double arms, two each of the small, medium, and large single servo arm.
Great for quick mounting servos, speed controllers and other items within aircraft, boats and cars.
Two complete Control Horn Sets
Designed for use with Glo-Fuel, Smoke Fluids, and water.
Silicone Fuel Line, Small (5/64" ID) 30ft Roll
This unit is set up for 4 Engines with 1 Cylinder ea.
Aileron connector for non-threaded wire.
Small Bell Crank arms are 7/8" in length and supplied with the bearing, mounting screw, washer and nut.
Large Bell Crank arms are 1" in length and supplied with the bearing, mounting screw, washer and nut.
Nifty Wing Mounting Kit contains brass inserts, 1/4 x 20 x 2" screws, wing pockets and instructions
Functions as an on/off "in line" battery switch for #473 thru #480 On-Board Glow Driver units
Replacement Glow Plug Harness Kit for Mcd475 Five Cylinder On Board Glow Driver
2Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
6Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
6pin Male Molex connector used on plug harness kit for On Board System #Mcd475.
9pin Male Molex connector used on plug harness kit for On Board Systems
Replacement 12V Motor for our Mark X & Super X 12V pumps.
Replacement Wavy Spring that are available in Sot132 and Sot135 Kits
This unit is set up for 3 Engines with 1 Cylinder ea.
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car
The Deephead 1.0" PlugLock (Glow Plug) adapter is for engines with recessed glow plugs.
This Electric Motor mount is adjustable to fit speed 400 to .25 size motors. The mounts are injection molded from a very light weight but very strong glass fiber filled nylon based material.
12" x 7" Folding Propeller. Assembled
This unit is set up for 2 Engines with 2 Cylinder ea.
High quality foam tape with a strong high quality adhesive on two sides. This tape is great for mounting servos, speed controllers and other items within aircraft, boats and cars
The Strong Box II is a larger version of the StrongBox that has been designed to meet the needs of giant scale flyers. It measures 3.5" deep, 3.3" wide, and 6.2" long. It weighs only 4 ounces complete with foam padding and hardware.
Lightweight injection molded wheels
3Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
3pin Male Molex connector used on plug harness kit for On Board System
9Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
Replacement Glow Plug Harness Kit for Mcd474TE
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car.
Replacement part: Check Valve for Sot1260 and Sot1261 Smoke Pump.
Replacement LED on glow driver for Mcd471 - Mcd479 On Board Systems and Mcd466 & 464 On Board systems.
Carbon Fiber filled Replacement Spring Loaded hinges.
Replacement hub for 6" Folding Propellers.
Replacement 11" x 7" Blades Only.
Replacement 12" x 7" Blades Only.
10" x 6" Folding Propeller. Assembled.
11" x 7" Folding Propeller. Assembled.
13" x 7.5" Folding Propeller. Assembled