A special injection molded hinge from Carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
Super "X" Silicone, Large (3/32" ID) 25ft Roll
A special hinge for the scale model control surface
Lightweight injection molded wheels
Steering arm that will stand up to the load and abuse a nose wheel gets without bending or flexing.
Heavy Duty Hinge designed for the location where you want more performance than a standard model hinge offers
This unit is set up for a 6 Cylinder Engine
A Carbon fiber filled Spring loaded nylon hinge designed for use on landing gear doors etc. where extra strength is needed.
Super "X" Silicone, Small (5/64" ID) 2ft pkg
The length is the standard 5/8" and come with 12" red Teflon wire.
Silicone Fuel Line 3/32 id 2ft
3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
One "X" arm, double arm, and one each of small and medium single arm.
Two each of four types, two double arms, two each of the small, medium, and large single servo arm.
Deans 4pin male connector with 12" Red & Black 20ga PVC Wire attached.
Small Control Horns are 3/4" tall and supplied with a pad and 2-56 screws for mounting.
High quality foam tape with an adhesive on one side. It's great for seating wings of aircraft or sealing hatches on model boats etc.
Deans 3pin male connector with 12" Red & Black 20ga PVC Wire attached
Silicone Fuel Line, Small (5/64" ID) 30ft Roll
Aileron Bearing is designed to be used with 3/32" wire. It has a 7/8" x 1/2" tab with multiple holes for firm mounting.
NI-STARTER® has a 3.5" barrel. The Battery is a NiMH 3800ma cel
Remote corded 3800ma NI-STARTER® has a 15" cord
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location
Our FiberGlass Tape is a finely woven glass material especially treated to accept resin into the weave.
Replacement 6" x 4" Blades Only. Package contains 2 Blades.
Replacement LED on glow driver for Mcd471 - Mcd479 On Board Systems and Mcd466 & 464 On Board systems.
Great for quick mounting servos, speed controllers and other items within aircraft, boats and cars.
Deans female charge Jack with plate and swrews for mounting
Nifty Wing Mounting Kit allows quick and easy mounting of the wing
Large Control Horns are 1 1/8" tall and supplied with a pad and 2-56 screws for mounting.
High quality foam tape with a strong high quality adhesive on two sides.
Remote corded 3800ma Metered NI-STARTER® has a 15" cord.
Tips fit both the power and extension cords
Metered 3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
Replacement 8" x 4" Blades Only.
8" x 4" Folding Propeller. Assembled
Small Bell Crank arms are 7/8" in length and supplied with the bearing, mounting screw, washer and nut.
High quality foam tape with an adhesive on one side.
Tips fit both the power and extension cords.
13" x 7.5" Replacement Blades
Replacement hub for Folding Propellers from 7" - 12"
10" x 6" Folding Propeller. Assembled.
Replacement hub for 6" Folding Propellers.
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
Replacement internal pump for Mark X & Super X fuel pumps 6V & 12V.
Replacement 7" x 4" Blades Only. Package contains 2 Blades.
Replacement 12" x 7" Blades Only.
The Deephead 1.0" PlugLock (Glow Plug) adapter is for engines with recessed glow plugs.
Large Bell Crank arms are 1" in length and supplied with the bearing, mounting screw, washer and nut.
They are supplied eight per package with mounting screws.
7" x 4" Folding Propeller. Assembled
6" x 4" Folding Propeller. Assembled.
Replacement Hub for 13" Folding Propellers
12" x 7" Folding Propeller. Assembled
Aileron connector for non-threaded wire.
11" x 7" Folding Propeller. Assembled.
The standard 5/8" connector with 18" Black Teflon wire.
supplied with mounting screws.
Replacement 10" x 6" Blades Only
Supplied eight per package with mounting screws
Replacement 11" x 7" Blades Only.
All are supplied with mounting screws.
High quality foam tape with a strong high quality adhesive on two sides. This tape is great for mounting servos, speed controllers and other items within aircraft, boats and cars
Supplied with mounting screws
13" x 7.5" Folding Propeller. Assembled
Replacement part: Check Valve for Sot1260 and Sot1261 Smoke Pump.
Supplied eight per package with mounting screws.
PlugLock (Glow Plug) adapter length is for deeply recessed glow plugs and comes with 12" red Teflon Wire
Replacement part: "T" Fitting for Sot1260 and Sot1261 Smoke Pump.
allow the servo speed to be adjusted, 2 to 10+ seconds of travel in either direction with no loss of torque.
Replacement 6V Motor for our Mark X & Super X 6V pumps.
Replacement plug harness kit for Mcd466 & Mcd464 On Board Systems.
Double control horn assembly has all items needed for two different installations.
Replacement 12V Motor for our Mark X & Super X 12V pumps.
High quality steel pins with a smooth chrome plating and the sharpest of points.
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car
2Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
The Nifty Plug & Socket Keeper is a great little item that will avoid the accidental disconnection of the servo cable plug and sockets within the model.
Male Molex pin used on all plug harness kits on all On Board Systems
Nifty Wing Mounting Kit contains brass inserts, 1/4 x 20 x 2" screws, wing pockets and instructions
A self contained unit 3 1/2" long by 1 1/4" and 1 1/4" high weighing only 3 ozs.