Replacement Glow Plug Harness Kit for Mcd479 Nine Cylinder On Board Glow Driver.
Replacement Glow Plug Harness Kit for Mcd477 Seven Cylinder On Board Glow Driver.
12pin Male Molex connector used on plug harness kit for On Board Systems
Replacement 18" extension cord that will convert a NI-STARTER or other locking type units into a remote corded unit.
Replacement power cord - 36" long
Replacement Glow Plug Harness Kit for Mcd476 Six Cylinder On Board Glow Driver. Kit i
12Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
9pin Male Molex connector used on plug harness kit for On Board Systems
Replacement Glow Plug Harness Kit for Mcd475 Five Cylinder On Board Glow Driver
9Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
6pin Male Molex connector used on plug harness kit for On Board System #Mcd475.
13" x 7.5" Folding Propeller. Assembled
13" x 7.5" Replacement Blades
This unit is set up for a 9 Cylinder Engine.
Tips fit both the power and extension cords
6Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
Replacement Glow Plug Harness Kit for Mcd474QE
5pin Male Molex connector used on plug harness kit for On Board System
18" extension cord that will convert a NI-STARTER or other locking type units into a remote corded unit
Replacement 12" x 7" Blades Only.
12" x 7" Folding Propeller. Assembled
This unit is set up for a 8 Cylinder Engine.
Tips fit both the power and extension cords.
Replacement Glow Plug Harness Kit for Mcd474 Four Cylinder On Board Glow Driver
5Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
4.8V 5000ma NiMH "C" with a female 4pin deans for Mcd473 - Mcd479 Pulsed On Board Glow Driver.
4pin Male Molex connector used on plug harness kit for On Board System
Replacement 11" x 7" Blades Only.
11" x 7" Folding Propeller. Assembled.
18" extension cord that will convert a NI-STARTER or other locking type units into a remote corded unit.
This unit is set up for a 7 Cylinder Engine
Nifty Wing Mounting Kit contains brass inserts, 1/4 x 20 x 2" screws, wing pockets and instructions
4Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
Replacement Glow Plug Harness Kit for Mcd472SE On Board Glow Driver
Deans female charge Jack with plate and swrews for mounting
4.8V 4000ma NiMH Sub "C" with a female 4pin deans for Mcd473 - Mcd475 Pulsed On Board Glow Driver.
Super "X" Silicone, Large (3/32" ID) 25ft Roll
3pin Male Molex connector used on plug harness kit for On Board System
Remote corded 3800ma Metered NI-STARTER® has a 15" cord.
Remote corded 3800ma NI-STARTER® has a 15" cord.
Replacement 10" x 6" Blades Only
10" x 6" Folding Propeller. Assembled.
Heavy Duty Hinge designed for the location where you want more performance than a standard model hinge offers
Super "X" Silicone, Large (3/32" ID) 2ft pkg
This unit is set up for a 6 Cylinder Engine
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better.
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location.
Nifty Wing Mounting Kit allows quick and easy mounting of the wing
Lightweight injection molded wheels
Replacement Glow Plug Harness Kit for Mcd473 Three Cylinder On Board Glow Driver
3Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board System
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car.
This unit is set up for 2 Engines with 4 Cylinders ea
Deans 4pin male connector with 12" Red & Black 20ga PVC Wire attached.
4.8V 3000ma NiMH Sub "C" with a female 4pin deans for Mcd473 - Mcd473 Pulsed On Board Glow Driver.
Remote corded 3800ma NI-STARTER® has a 15" cord. Excellent for soft mount engines with a lot of vibration
Remote corded 3800ma NI-STARTER® has a 15" cord
Super "X" Silicone, Small (5/64" ID) 25ft Rol
2pin Male Molex connector used on plug harness kits for On Board Systems
A Carbon fiber filled Spring loaded nylon hinge designed for use on landing gear doors etc. where extra strength is needed.
NI-STARTER® has a 3.5" barrel. The Battery is a NiMH 3800ma cel
NI-STARTER® has a 3.5" barrel
Replacement 8" x 4" Blades Only.
8" x 4" Folding Propeller. Assembled
2V Field Trickle Charger is small, light weight, and attaches to any convenient place on your field box to top off your Ni-Starter
Installed temporarily to hold the control surface in place while sanding and shaping is being done.
A special hinge for the scale model control surface
Horn assembly is available alone or with 6 feet of pull-pull cable and 4-40 hardware.
Super "X" Silicone, Small (5/64" ID) 2ft pkg
This unit is set up for a 5 Cylinder Engine
Remote PlugLock adapter supplies power to your concealed glow plug from a remote location
PlugLock® Glow Plug adapters are ideal for modelers wishing to use their power panels to light glow plugs.
High quality foam tape with an adhesive on one side. It's great for seating wings of aircraft or sealing hatches on model boats etc.
Supplied eight per package with mounting screws.
supplied with mounting screws.
Functions as an on/off "in line" battery switch for #473 thru #480 On-Board Glow Driver units
2Pin Female Molex Connector used on the glow driver side of the GlowPlug Harness on the On Board Systems
PlugLock Glow Plug Power Cord will fit your Traxxas® or Revo electric start T-Maxx type of R/C car
110V American AC charger for the Super Mcd466
This unit is set up for 2 Engines with 3 Cylinder ea.
Deans 3pin male connector with 12" Red & Black 20ga PVC Wire attached
4.8V 3000ma NiMH Sud C with a female 3pin deans for Mcd471 and Mcd472 Pulsed On Board Glow Driver.
A Spring loaded nylon hinge designed for use on landing gear doors and many other unique applications
Replacement Hub for 13" Folding Propellers
Our FiberGlass Tape is a finely woven glass material especially treated to accept resin into the weave.
Metered 3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
3800ma NI-STARTER® has a 3.5" barrel and is supplied with an UL Approved 110V AC Charger
Silicone Fuel Line, Small (5/64" ID) 30ft Roll
A special injection molded hinge from Carbon fiber filled designed for use on flaps, spoilers, landing gear doors and many other unique applications where extra strength is wanted
Metered 3800ma NI-STARTER® with a 2.5" barrel with No charger